Hoofdafbeelding Agilent G1361A Prep Pump 1200 Series

Agilent G1361A Prep Pump 1200 Series

Article nr.: 8100
New for sale
Wide selection


Agilent G1361A Prep Pump

The preparative pump is a cam driven pump, with fixed stroke and two parallel pistons, each with (identical ball and seat) inlet and outlet valve. Each of the two pump pistons is capable of delivering a maximum of 50 ml/min flow at up to 400 bar pressure.

The two cams have overlapping delivery cycles. Compression losses are calculated and smooth delivery is ensured through variation of the motor speed over the pump cycle.

The pistons are guided through two seals each. The gap between those seals is connected to capillary fittings, this way seal wash is not only an option, but integral part of every pump. A peristaltic pump, to automate seal wash, is also part of the system.

Weight15.0 kg (34 lbs)
Dimensions (width × depth × height)200 x 345 x 440 mm (8 x 13.5 x 18 inches)
Line voltage100 – 240 VAC, ± 10%
Line frequency50 or 60 Hz, ± 5%
Power consumption250 VA / 210 W / 717 BTU
Ambient operating temperature4–40 °C (41–104 °F)
Ambient non-operating temperature-40–70 °C (-4–158 °F)
Humidity< 95%, at 25–40 °C (77–104 °F)
Operating AltitudeUp to 2000 m (6500 ft)
Non-operating altitudeUp to 4600 m (14950 ft)
Safety standards: IEC, CSA, ULInstallation Category II, Pollution Degree 2


HPLC Pump Prep Pump
Agilent HPLC system Agilent 1200 series
Want to stay up to date with the latest news?
Then sign up for our newsletter!
Stay informed and sign up for our newsletter